Page 7 of 14 FirstFirst 1234567891011121314 LastLast
Results 61 to 70 of 138

Thread: [REL] iGoBMW transparent

  1. #61
    Newbie Asterix1965's Avatar
    Join Date
    Jan 2007
    Posts
    52
    Quote Originally Posted by Jaskari View Post
    part from your IBusRR.ini:

    Dan do you know the code for changing Fahrenheits to Celsius in OBC (like consumption unit is changed in SET_OBC_TO_L100Km)? I don't have OBC in my car and BMW skin shows fahrenheits instead of celsius in outside temp. Or is there a way in Roadrunner to take part of $OUTSIDETEMP$ (stripping + and C) and then doing a conversion (C=F-32x5/9)?

    Also one thing is bugging me.. after stopping the engine RPM meter wont go to 0. Is this normal?
    Just go button "SET_OBC_TO_L100Km" the temperature went from C to F Degrees.
    To redisplay degrees C, I had to push the button on the right, for instance the one that serves to set the timetable, taking care to see in counts km temperature and only so I could redisplay degrees C.
    I hope that I explained well

  2. #62
    Newbie Asterix1965's Avatar
    Join Date
    Jan 2007
    Posts
    52
    other problem,
    in my car I do not have the electronic accelerator and then buttons on the right of the steering wheel are unused. Can I use these buttons to manage other functions on the skin RR?
    Anyone who knows the codes to be put to use these buttons?
    Thank you

  3. #63
    Newbie
    Join Date
    Jul 2006
    Location
    Finland
    Posts
    26
    Quote Originally Posted by Asterix1965 View Post
    Just go button "SET_OBC_TO_L100Km" the temperature went from C to F Degrees.
    To redisplay degrees C, I had to push the button on the right, for instance the one that serves to set the timetable, taking care to see in counts km temperature and only so I could redisplay degrees C.
    I hope that I explained well
    "button on the right".. do you mean button in OBC? There seems to be no other buttons in bmw3.skin and I do not have OBC in car

  4. #64
    Newbie Asterix1965's Avatar
    Join Date
    Jan 2007
    Posts
    52
    If you control with skin editor bmw3.skin you realize that is where the word "SET_OBC_TO_L100Km" corresponds to a command that sets litres x 100 km also changes the value in degrees C to F.
    If you have not OBC do not know how you can do to move from Degrees F to C.
    To me it is enough to push the button to set the time while they were displayed degrees and so reset the value or fair.

  5. #65
    Newbie
    Join Date
    Jul 2006
    Location
    Finland
    Posts
    26
    Quote Originally Posted by Asterix1965 View Post
    If you control with skin editor bmw3.skin you realize that is where the word "SET_OBC_TO_L100Km" corresponds to a command that sets litres x 100 km also changes the value in degrees C to F.
    If you have not OBC do not know how you can do to move from Degrees F to C.
    To me it is enough to push the button to set the time while they were displayed degrees and so reset the value or fair.
    Problem solved I changed SET_OBC_TO_L100Km code in IBusRR.ini to this

    Code:
    80 05 BF 15 01 04
    and now I have celsius back It first shows MPG in consumption, but if I execute this several times (click on "SET OBC TO L/100Km") in my car it will cycle through MPG-US MPG-L/100km and after that start from beginning again (MPG). So this way I can set consumption to L/100km too

  6. #66
    Low Bitrate
    Join Date
    Feb 2008
    Location
    Ireland
    Posts
    86
    Quote Originally Posted by Jaskari View Post
    Code:
    80 05 BF 15 01 04
    Good stuff!

  7. #67
    Newbie
    Join Date
    Apr 2008
    Posts
    2
    You can have the files. psd of your skin?
    Thank you

  8. #68
    Newbie
    Join Date
    Feb 2008
    Posts
    9
    Skin works perfect. I have one cuestion for ibus?
    Can I put some button to set volume up and down?

    Thank you dann.

  9. #69
    Low Bitrate
    Join Date
    Feb 2008
    Location
    Ireland
    Posts
    86
    RE: PSD file; I may release it, you can use the blank menu template if you want to change menus.

    RE: jerro_25; I'm not sure what you mean -
    At the moment you need to use the Steering Wheel buttons to change volume OR use the the Mixer screen.

    Or if you want to change PC volume with the Steering Wheel, edit ibusrr.ini.

  10. #70
    Newbie
    Join Date
    Feb 2008
    Posts
    9
    Quote Originally Posted by dan32500 View Post
    RE: PSD file; I may release it, you can use the blank menu template if you want to change menus.

    RE: jerro_25; I'm not sure what you mean -
    At the moment you need to use the Steering Wheel buttons to change volume OR use the the Mixer screen.

    Or if you want to change PC volume with the Steering Wheel, edit ibusrr.ini.
    Sorry, but my english is bad :-S. I am from Spain and I studied a little.

    I want change PC volume with the Steering Wheel + and -, but I don't know.
    What do I put in ibusrr.ini?
    Yesterday I searched and I don't see nothing.

    Thank you

Similar Threads

  1. Digital FX 2.0 Transparent Released
    By JohnWPB in forum RR Skins No Longer Supported
    Replies: 3759
    Last Post: 03-07-2008, 12:23 PM
  2. Replies: 5
    Last Post: 01-06-2008, 09:36 PM
  3. transparent tutorial?
    By davidp in forum RR Skins
    Replies: 3
    Last Post: 08-28-2007, 09:24 PM
  4. Winamp transparent visualization issues
    By TSur in forum Road Runner
    Replies: 1
    Last Post: 06-12-2007, 05:54 PM
  5. Transparent skins possible???
    By Supergong in forum FreeDrive
    Replies: 4
    Last Post: 01-13-2006, 02:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •