LSX (VOID) released

**kolemieux** · 06-24-2006, 10:08 AM

Just tested/verified when back to 2.9/AVS with one of the stock Vis - Embed without borders is fine. Quick show then the Vis locks in place.

Now in order for me to use the Spectrum I need to upgrade to 5.x then try - and this is where it seems to no longer lock. Sound like a WindowID issue? You would certainly know if that was the case

Originally Posted by kolemieux

Ok I've been working on this topic since all last night.... I love the Spectrum vis u sent to me and are using. Apparently it needs a flavor of Winamp greater than 2.9 .. so am using 5.x - it works great.

Here seems to be my issue and suspect you've seen this (and reference to moving things around due to resolution)... Oddly for me I cant' seem to dock/embed a vis from 5.x (or.... at least this Spectrum one). I am working thru it but are you aware of a sepcific WindowID you are using for this Vis in order to get it to dock/embed...

Thanks a million - I am working backwards to dupe and replicate the behavior now as well - but the borders mentioned here is perhaps part of it.

**e30_droptop** · 06-24-2006, 05:56 PM

Originally Posted by liquid_smoke

the play/pause thing is a status indicator for what the current state is. I cant change it, can only remove it.

The exit button is named EXT because i wasnt sure if i really wanted it located there, so i named it like that to remind me to think about if i want it there or something else more important. It just kind of stuck around.

@kolemieux you shouldnt have to make any alignment changes etc, it'll look fine at 800x600, same res i run. You might notice some things may look slightly off in 800x480 but this is to compenstate for labels no being resized with everything else, so i nudge all labels down about 5pixels from where i want them to really be.

oh, e30 yeah, the vechical icon is HUGE, i did this cuz with the default one i allways had a hard time seeing it (eye sight not the best) and i wanted something i could easily glance at without effort.
i would hold off till the update if you want to do igmon for the first time now. The skin thats avail now was made for igmon 1.x and using it with 2.x has some issues so i would stick to the default igmon 2.x skin till i update.

Ill wait for your latest update {like everyone else here : )} to implement Igmon cause' I have a feeling that you will make a nice skin for GPS that complements the Igmon version 2.

Good idea!

**liquid_smoke** · 06-25-2006, 03:53 PM

updates are done and locked.
gonna do some last minute testing today, and upload latest updates early tonite.
late tonite if i run into any serious issue.

**dbassix** · 06-25-2006, 05:11 PM

hurry up... wanna test it on the way to work 2morrow morning...

**e30_droptop** · 06-25-2006, 05:32 PM

Originally Posted by liquid_smoke

updates are done and locked.
gonna do some last minute testing today, and upload latest updates early tonite.
late tonite if i run into any serious issue.

Whooo Hooooo
!

**kolemieux** · 06-25-2006, 08:48 PM

Very excited to test the new rev. Did you happen to have any pointers on the Vis lock/embed topic. I have duped it on two boxes and in order for the Spectrum to work - I need 5.x winamp. However, its a given that it wont lock/embed. Since you have it working I am sure you must have found another ID or something...

Let me know and will double check with new release. I did verify this with some other skins as well - and even creating a skin page alone.

Thanks for the great work - I will keep refreshing the page ;-)

Originally Posted by liquid_smoke

updates are done and locked.
gonna do some last minute testing today, and upload latest updates early tonite.
late tonite if i run into any serious issue.