Originally Posted by Blacryan
If you look at the picture, you see the two wires on the top right that say "To Illumination System". and they are pins 2 and 3. These are the wires(they are labeled) on the back of the NAVI buttons. I don't remember which is which, but you can test by touching these to a 12v source, but one you ground and the other you put power to. they have to both be hooked up to get them to work. as soon as power is sent to one with the other grounded they light up.
I just want to confirm. The navi buttons do work right or is it just for show?
they are for show. They just light up with the headlights