Add an Aux input to nissan Sentra Clarion Auto Stereo (PO-HM5064N-01)
I have a Clarioon PO-HM5064n-01 Car stereo in my Nissan Sentra (B15) 2003.
I just downloaded the TDA7340 AUDIO SIGNAL PROCESSOR Data Sheet and found that ther is two imput called HCR & HCL. I soldered one wire at each of this an a third wire from a Ground. I drill a hole at the right front face of the stereo and put a female 3.5 stereo jack. The HCR to the right imput, The HCL to the Left imput and the Ground to the negative imputo. Now when i plug my mp3 player while in the FM mode. The FM sound fades off and i can hear my music from my mp3 player.
I'm attaching the picture so you can do the same.http://www.mp3car.com/vbulletin/imag...0cb4254623.jpghttp://www.mp3car.com/vbulletin/imag...0cb5e22078.jpg
Is this for the factory installed stereo?
Thanks for posting this: it was exactly the information that I was looking for. It was not clear from your post if this was the factory installed stereo, or a stereo that you had put in later?
I was eager to attach a stereo input on my factory installed stereo as well, and these directions seem perfect.