Range Rover - reworked install

First few tries here:
http://www.mp3car.com/vbulletin/show-off-your-project/15010-range-rover-epia-install.html

http://ebay.sinyak.net/newrr1.jpg

Epia tucked away in the body panel. On the left side of the MDF panel is the Cheesebox that switches the signal to the rear view camera.

http://ebay.sinyak.net/newrr2.jpg

Cover put into place - no sign of the computer. The silver thing in the middle is the key switch to turn off the power to the computer.

http://ebay.sinyak.net/newrr3.jpg

Volume is controlled by the Griffin Powermate with a more car-like knob.

http://ebay.sinyak.net/newrr4.jpg

The switches are for tactile control of software so that I can switch songs without having to look at the screen. Connected to the computer through a keyboard encoder.

http://ebay.sinyak.net/newrr5.jpg

http://ebay.sinyak.net/newrr6.jpg

HU and USB sound card in the glovebox.

Looks awesome man, I like the tucked away epia. Good job with the burltech around the monitor.

Nice and stealthy...That radio in the glovebox has got to be redone. :D

Good job. Keep us updated.

That is one sweet install. I have the griffin powermate with the HUGE knob too. Could you post some details on how you went about replacing the knob and where I could score a replacement.

Also I would love to know how you set up the controls for next/prev song. More detailed information there would also be great.

Thanks

very good. I especially like the trunk, Yeh, let us know about the knob and how you can skip songs. I have touchscreen, but I wouldn't mind having that as well.

Awesome !

Very nice !

Please let us know how you got buttons to go to next song etc, is girder used or a hacked up keyboard ?

Where are these switches you speak of ? I see none ?

That is a smooth install!! Good work!

Quote:

---

Originally Posted by frodobaggins

Where are these switches you speak of ? I see none ?

---

http://ebay.sinyak.net/newrr7.jpg

Quote:

---

Originally Posted by Defiler

That radio in the glovebox has got to be redone

---

Please elaborate



The switches are attached to a KeyWiz keyboard encoder.
http://www.groovygamegear.com/Page2.html

The Griffin Powermate has a standard 1/4" knob. Radio Shack, Jameco, and almost any electronics part store will have replacement knobs. The hard part was disassembling the enclosure.

Had to pry it open with a screwdriver since it is glued together. Also had to resolder the connecting cables since they were very flimsy and broke during my heavy-handed disassembly.

Quote:

---

Originally Posted by vladilen

http://ebay.sinyak.net/newrr7.jpg


Please elaborate



The switches are attached to a KeyWiz keyboard encoder.
http://www.groovygamegear.com/Page2.html

The Griffin Powermate has a standard 1/4" knob. Radio Shack, Jameco, and almost any electronics part store will have replacement knobs. The hard part was disassembling the enclosure.

Had to pry it open with a screwdriver since it is glued together. Also had to resolder the connecting cables since they were very flimsy and broke during my heavy-handed disassembly.

---

Do you have a link to a manual for that keyboard encoder? It looks pretty useful. A schematic of how you wired your switches would be terrific too if you could.

where did you pry from? The rubber part or where the knob attaches to the base? Or both? Oh and can you still use the push and twist functions with the new knob?