2003 Mazda 6 project

**Brunation** · 04-09-2005, 12:57 PM

First, I would like to thank everybody in this forum for all the tips, tricks and solutions. A special Thanks goes to Frodo for the amazing Front End and Rando for the USB 5v cut off solution. Because of this forum I was able to get this project installed and running. And I got to say… I had fun doing it.

The PC specs are:
Xenarc 700TSV
Via Epia M10000
1gb of Ram
200gb 3.5” Hard Drive
Opus 150w w/ Rando USB 5v mod
Win XP and FrodoPlayer
XMPCR running FrodoSat
GPS w/ (for the moment) Microsoft S&T 2005

So, once again Thank You All for the help. I'd like to hear from all of you, any comments are appreciated.

**Brunation** · 04-09-2005, 12:58 PM

Here are some more pics...

**bodaciousllama** · 04-09-2005, 01:12 PM

nice

i love the car and i love the computer

Good place to mount it too - when u leave the car, just flip down the cover

Wheres the computer located, though?

**scott_fx** · 04-09-2005, 01:33 PM

very nice. Cool car too, I had a mazda 6 rental when i was getting my engine built...it was a pretty fun car, though i think i broke it

does that screen pop up automatically?

**Brunation** · 04-09-2005, 01:45 PM

Wheres the computer located, though?

The Computer is in the trunk... in a IBM netvista case... see picture #9 above.

does that screen pop up automatically?

Nope... I was not able to come up with a motorized solution for the screen as of yet... I'll be looking at diferent solutions to that... but for now, it is mounted to the top of the lid and it swings out as I open it, with the help of a spring. and it stays very tight in it rest position when open...

**scott_fx** · 04-09-2005, 02:00 PM

sounds automatic to me. nice work!

**Zenith_Warrior** · 04-09-2005, 02:07 PM

I was thinking of putting a screen on the dash and using servo motors to move it up and down. Only thing is how to get the servos to move before windows starts... or (once your system is working reliably) do you need to?

**bodaciousllama** · 04-09-2005, 05:16 PM

Originally Posted by Zenith_Warrior

I was thinking of putting a screen on the dash and using servo motors to move it up and down. Only thing is how to get the servos to move before windows starts... or (once your system is working reliably) do you need to?

I suppose you could have it totally seperate from the computer, with a seperate switch, or have it wired into the ignition

I dont know much about servos though

EDIT - BOOM! Way to hook up the servo, courtesy of Bugbyte http://www.dellabarba.com/ibug/Insta...stallation.htm (but I'm sure you already read that...already)

**Scouse Monkey** · 04-09-2005, 05:29 PM

Brunation nice install.

if you guys want more info on servo controlls then look for some of my posts on servo stuff (search my name and servo) for cheap standalone systems and mechanism ideas.For PC controlled stuff look at bugbytes setup and John _Draws gti screen.

some links as i had them in my subs. bugbytes setup can be found from his profile...
Best way to make a 'flip up' monitor?
Clean GTI VR6

Any other questions post em on the forum and let me know a link via pm and i will try and help.