Page 1 of 7 1234567 LastLast
Results 1 to 10 of 62

Thread: '98 Mustang Cobra Convertible Carputer Install

  1. #1
    FLAC W3bMa5t3r's Avatar
    Join Date
    Apr 2006
    Location
    Washington, DC
    Posts
    1,268

    Talking '98 Mustang Cobra Convertible Carputer Install

    My Car is a 1998 Ford Mustang Cobra Convertible - White.

    Not too many mods, but:
    Spec Racing Stage 2+ Clutch
    Magnaflow Magnapack Cat-Backs with straight through mufflers
    Bilstein BTS, Shocks Struts Springs - purchased, not yet installed
    Hotchkis Lower Rear Control Arms - purchased, not yet installed
    K & N Air Filter
    FR500 Steering Wheel
    Bullit Pedals
    Removed Air Silencer
    Crystal Clear - Diamond Cut Headlights and Corner Lights with Chrome Off / Amber On Bulbs
    Sequential Rear Turn Signals
    Grillcraft Front Grills






    And the 10.4" Touchsreen monitor in a custom bezel. And yes, everything done to this car was done by myself. :-)




    #############################
    #### New MicroATX Based System ###
    #############################

    10.4" Lilliput LCD VGA Touchscreen Monitor
    GIGABYTE GA-K8VM800M Socket 754 VIA K8M800 Micro ATX AMD Motherboard
    AMD Athlon 64 3400+ Newcastle 2.4GHz Processor
    2GB DDR333 (PC2700) Ram
    D-Link DWL-AG530 IEEE 802.11a/b/g PCI Tri-Mode Dualband Wireless Adapter
    2x 80Gig WD Hard Drive
    2x 120Gig WD Hard Drive
    2x M2-ATX Power Supplies
    Dazzel DVC80 Video/Audio Capture
    Custom setup of a Dual-Layer DVD/CD Burner converted to USB
    Carnetix P1900 Ver. 2.1
    Cellink BTA-6030 USB 2.0 Bluetooth Enhanced Adapter (best I've found anywhere) for connecting to my Samsung A900 phone for internet
    D-Link USB hubs x3 (powered)
    6' VGA Extender Cable - Triple-Shielded
    Bulletcam and mic
    Hacker Lite Keyboard
    Road Runner
    iGuidance 3.0
    Digimoto 4.03 mOByDic package OBDII Scanntool and Software
    StevieG AccessCP (usually not used)

    Let me know what you think.

  2. #2
    FLAC W3bMa5t3r's Avatar
    Join Date
    Apr 2006
    Location
    Washington, DC
    Posts
    1,268
    NEW BEZEL


    The Center Console - Bezel with the 10.4" LCD VGA Touchscreen Monitor, with a custom din bezel for my dual layer dvd/cd burner. For anyone who knows mustangs you know what I've done here. For those who don't, this center bezel has the hvac vents up top, followed by a din for the hvac controls, and then 2 dins for audio equipment. That should give you an idea of what I've done..

    Old Bezel


  3. #3
    Newbie
    Join Date
    Jun 2006
    Posts
    7
    Looks good. I was looking to do something similar with my stang.

    Where did you relocate the HVAC controls?

  4. #4
    FLAC is for flaccid parksgm's Avatar
    Join Date
    Dec 2005
    Location
    Dallas, Texas
    Posts
    1,119
    Quote Originally Posted by tienuts
    Where did you relocate the HVAC controls?
    Same question.

    I have a 1998 GT, and I relocated my HVAC controls to the area where you have the red toggle switches installed (just in front of the shifter). I didn't want to lose my headunit, so I installed it in the lower DIN space (where the factory location for the CD player is) and I have a 7" touchscreen in the space formerly occupied by the HVAC and upper DIN.

    From the pics, I'm guessing that means your HVAC controls are in the location formerly occupied by your cupholder. That, or you just set the temp at 75 degrees and fan speed at 1/2, and are content. ;-) I'd like to see pics of your HVAC install, if you don't mind...

    Also, I sent ya a private message about the fate of your old saddle leather interior...

  5. #5
    FLAC W3bMa5t3r's Avatar
    Join Date
    Apr 2006
    Location
    Washington, DC
    Posts
    1,268
    The HVAC Controls are actually mounted in the glove box. lol. which of course is temp until I buy and setup the computer controlled hvac control setup.

  6. #6
    FLAC is for flaccid parksgm's Avatar
    Join Date
    Dec 2005
    Location
    Dallas, Texas
    Posts
    1,119
    Quote Originally Posted by W3bMa5t3r
    The HVAC Controls are actually mounted in the glove box. lol. which of course is temp until I buy and setup the computer controlled hvac control setup.
    Hmmm...computer controlled HVAC huh? Are you planning on adapting a Ford unit or using something aftermarket? I hadn't heard of any aftermarket equipment...

  7. #7
    FLAC W3bMa5t3r's Avatar
    Join Date
    Apr 2006
    Location
    Washington, DC
    Posts
    1,268
    Quote Originally Posted by parksgm
    Hmmm...computer controlled HVAC huh? Are you planning on adapting a Ford unit or using something aftermarket? I hadn't heard of any aftermarket equipment...
    This is what I've been looking at -here- or something similar.

  8. #8
    FLAC W3bMa5t3r's Avatar
    Join Date
    Apr 2006
    Location
    Washington, DC
    Posts
    1,268
    More pics

    My Center Console (This is the console from a 96, because I hated the 98's cupholders):


    Ignore the mini-itx comment in the camera pic. I'm using the MicroATX board with a USB Aud/Vid Capture device.

  9. #9
    FLAC W3bMa5t3r's Avatar
    Join Date
    Apr 2006
    Location
    Washington, DC
    Posts
    1,268
    Back Seat is finished!!! There actually isn't a back seat, but a nice solid enclosure (bottom of seat area and back of seat area) for the pc and peripherals. All hidden and tucked away.

    If you know what a mustang convertible's back seat looks like... here's mine.
    Back isn't completed, but it's heading that direction. It will be completly key lockable and with no 'windows' to deter theft. There are 3 12v fans behind the laptop to exhaust the hot air.


    Laptop is no longer used. See other pics...



    Looks much better now than in this pic... I'll have to get some updated pics.

  10. #10
    Maximum Bitrate Sidewalksalvage's Avatar
    Join Date
    Mar 2006
    Location
    NJ/RI
    Posts
    826
    I like the look of the project so far! Its coming along great.

    Quick question...what are the multiple switches below the dvd slot for (the red light up ones...)
    Brown 2010

Page 1 of 7 1234567 LastLast

Similar Threads

  1. 1987 Mustang GT Convertible MP3 Mustang
    By jzgt in forum Worklogs
    Replies: 27
    Last Post: 10-26-2007, 08:18 PM
  2. 98 LS-Vtec Integra - Carputer Version2
    By DerekR in forum Show off your project
    Replies: 32
    Last Post: 04-28-2006, 12:01 PM
  3. Store to install carputer?
    By enkne1 in forum Newbie
    Replies: 1
    Last Post: 08-06-2005, 09:35 PM
  4. Mustang 1-DIN Indash Install
    By NOS TANG in forum Show off your project
    Replies: 8
    Last Post: 12-18-2004, 10:53 AM
  5. 2000 Mustang GT Convertible Mp3 project
    By mp3stang02 in forum Show off your project
    Replies: 19
    Last Post: 05-24-2003, 03:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •