Printable View
First about a computer:
Intel 865 GVHZ read more
Celeron 2.0 Ghz (400Mhz)
Samsung 512 Mb
Seagate momentus 80 Ggb
Sony Combodrive
Beholder TV 409 FM read more
Creative Audigy 2 LS
Logitec UltraX Media remoute read more
OPUS DXC.1215 150W
Xenarc 700 IDT
GlobalSat BU 353 (Has forgotten to write)
PocketGIS
Frodoplayer
Sound:
Magnat theROCK 4ch 600 W
Front: DLS R6A Reference Limited Edition (with UR1 tweeter)
Rear: Regular sonata acoustics
SPL II - 2/400 2ch 400 W
JBL 10"
Fotos:
Plans:
Rearview camera
Frontview camera (For suppression of problems (extortion of money) from our traffic police)
Installation of a computer in volume of a back wing
Installation of a subwofer in volume of other back wing
Installation 15 " the monitor in a cover of a luggage carrier
Installation of the monitor in the central console
Installation 17 " the forged wheel disks :D
nice
some picture of 15" monitor ??
He hasn't installed it yet...Quote:
Originally Posted by 4u2n
Actually I wished to show the project after all components will be placed. As soon as I shall begin processing I shall place new photos.
Well in occasion of accommodation of the monitor: installation of a plywood leaf with apertures for the monitor and speakers is preliminary planned (With the subsequent covering, аnd strengthening of springs of a cover of a luggage carrier)
I hope in 2 weeks or month the second version of installation will be ready
Here it is possible to look the step-by-step photoreport on the done work. Photos are constantly added, work is completed on 70 %
I ask me to excuse for the Russian domain. It is my native land, it to me is closer
So. I have practically finished the project. I shall lay out some photos that "to excite the public"
The luggage space has been completely pasted over by a noise isolation:
http://fotos.alros.ru/d/1607-2/P8030005.JPG
The additional floor has been made of plywood
http://fotos.alros.ru/d/1628-2/P8090050.JPG
The case for a subwoofer counted and did, for reception of as much as possible qualitative sounding
http://fotos.alros.ru/d/1658-2/P8090060.JPG
In a back of back seats the aperture for an output of a subwoofer in interior has been made
http://fotos.alros.ru/d/1682-2/P8090068.JPG
Subwoofer after installation.
http://fotos.alros.ru/d/2227-2/P9070341.JPG
The monitor has been built in in the central console.
http://fotos.alros.ru/d/2300-2/IMGP4218.JPG
looks much better, but do you have any more pictures of the sub, I'm kind of confused as to how it is set up...
the monitor looks 100 times better
x2 on the pictures of the sub box.
about sub...
First of all panels have been made of two combined 10 millimetric leaves of plywood (MDF)
http://fotos.alros.ru/d/1655-2/P8090059.JPG
Further have stuck together and have braided in pair kgs of screws, a box of the demanded volume
http://fotos.alros.ru/d/1658-2/P8090060.JPG
Has cut in a back of a seat an aperture that the subwoofer looked directly in interior, without superfluous obstacles in a way
http://fotos.alros.ru/d/1688-2/P8090070.JPG
In a ready box of a subwoofer has made 2 apertures for a sub head and for plexiglas
http://fotos.alros.ru/d/1691-2/P8090071.JPG
http://fotos.alros.ru/d/1745-2/P8090090.JPG
The case is ready
http://fotos.alros.ru/d/1748-2/P8090091.JPG
Further, the case has been processed by a spray antigravel
http://fotos.alros.ru/d/1757-4/P8110094.JPG
Has fitted in carpet (or something in this sort)
http://fotos.alros.ru/d/1766-2/P8110097.JPG
Here that as a result it has turned out. It is necessary to make the panel of a back wall with an aperture for plexiglas and to press it to the case of a subwoofer
http://fotos.alros.ru/d/2155-2/P9060311.JPG
thats all... from outside
http://fotos.alros.ru/d/2230-2/P9070342.JPG
http://fotos.alros.ru/d/2239-2/P9070348.JPG
from inside
http://fotos.alros.ru/d/2248-2/P9070351.JPG