ASIO VST Plug-in Method with KX Project Compatible Sound Card
What You Need
Select KS 0/1 output
for the best result (because it bypasses the windows
KMixer). DS 0/1 will work too.
KS = Kernel Streaming
Foobar Resampling to 48khz
DS = DirectSound
: Whitout resampling playback will fail. KX drivers only work at 48khz in DSP mode.
KX will record in ASIO everything that is coming from the FXBus 0/1
KX ASIO Configuration
Select 170ms latency as we dont care about latency for playback and some VST plug-ins
are more accurate with larges chunks of data.
8+8 means 8 inputs channels and 8 outputs channels.
Console Audio I/O Configuration
Select only the I/O channels you need for better performance.
Console Routing example:
KX Master Volume and gain
Input or Output 1 and 2 in Console are 0/1 in KX.
The last step involves applying
a Master Volume and gain to the outputs then connect everything to the K2LT. The Master Volume part is very important because it is the only control we have over the volume (when using Kernel Streaming). Implementing it at the last step will prevent any delay. If it is implemented at the first step (before ASIO recording), there is a very annoying 170ms delay. Fixed negative gains prevent any clipping of the card preamp.
Article written by BenOBS