Results 1 to 7 of 7

Thread: Help, 1.0.5.2 update just installed now SD crashes before starting

  1. #1
    Constant Bitrate Troy McClure's Avatar
    Join Date
    Sep 2004
    Posts
    157

    Help, 1.0.5.2 update just installed now SD crashes before starting

    How about some help here GOC. Attached is the log file.

    So ya know, I am using a purchased/reg'd version but am still waiting for the CD to use the navigation. On the bright side, UPS says it's getting delivered today. Also, I did not do the 1.0.5.1 update, I assume it is ok to skip over updates to just the latest?

    Forget this post, I received the DVD and installed it, updated to latest and viola, it works. Now I have a whole new problem

    Thanks,

    Troy
    Done!

    If you're into fishing, checkout my website! http://www.pennsylvaniaanglers.com

  2. #2
    Newbie
    Join Date
    May 2005
    Posts
    46
    I updated to 1.0.5.2 and SD also crashes after the opening screen.

    I have sent in a log file from the runtime error reporting tool.
    SLOJAM

    1972 'slightly enhanced' 240Z
    Epia M10000 Win XP
    Creative Soundblaster Audigy 2 ZS
    7" Touchscreen XMPCR GPS

  3. #3
    Newbie
    Join Date
    May 2005
    Posts
    46
    I have replicated this on my notebook as well. The notebook has the trial version installed, and my car computer has a registered version installed. Both 'upgraded' to 1.0.5.2 and both now crash right after the welcome screen. I have sent logs in via the runtime error report tool. I was able to run 1.0.5.2 in developer mode on my notebook - just not normal mode.

    I have tried loading with -GDI, -ResetConfig, and -ResetRegistration flags to no avail.
    SLOJAM

    1972 'slightly enhanced' 240Z
    Epia M10000 Win XP
    Creative Soundblaster Audigy 2 ZS
    7" Touchscreen XMPCR GPS

  4. #4
    Newbie ether's Avatar
    Join Date
    Jul 2004
    Location
    California
    Posts
    34
    Also experiencing the same issues for debugging mode, low performance and standard SD (trial) - not receiving an expired trial error any longer just a crash. Development mode crashes when it loads to the skin editor, too. Saved a few error logs also in case needed
    Gary
    1997 Audi 1.8TQM
    Alpine/MB Quart/JL Audio - Via M12000 carputer 1 din (floor board) Sound Blaster External USB, Lilliput 7" TFT in custom motorized 1 din housing, OBDII engine management and diagnostics, XM radio, WiFi/Bluetooth, FrodoPlayer

  5. #5
    Newbie
    Join Date
    May 2005
    Posts
    46
    "Resolution"

    I looked at the logfile and saw that I was getting the following exception error, causing SD to crash:
    =======================
    INFO: Creating CNAVRecentDestinationsModule.
    INFO: EXCEPTION DETECTED STACK TRACE FOLLOWS
    ######## EXCEPTION: 0xC0000005 at address: 0x0050147C: ACCESS VIOLATION write attempt to address 0x00000074
    1: 07/15/06 12:06:06

    1: StackWalk(): GetLastError = 487
    =======================

    Since I have am running the trial version (waiting for the DVD to arrive UPS), I do not have the NAV module installed. In the past when I ran SD (a few days ago) it would run, but the NAV section was not enabled - as is advertised when you download the trial. On Thursday I download 1.0.5.2 and also updated my system with several Microsoft updates. After that, I was unable to run Streetdeck and saw the above exception in the log file. I can not assert that this has anything to do with the Microsoft updates, but it was one of the changes made that night to both a laptop and the car computer. I tried a number of switches, incuding -GDI, -resetconfig, -resetregistration. I also rolled back to 1.0.5.0, 1.0.5.1 and then back to 1.0.5.2 to no avail.

    After I looked at the logfile a bit more, it occured to me to try -NoNav, since it appears to be happening in a NAV module (the exception). Once I did that, I was able to run SD again.

    The original poster, Troy, in this thread stated that he had a problem, but then when he ran the install off of the DVD, all was 'fixed'. This would be explained by the fact that his full install includes the NAV module/mappoint.

    So if you are having this problem, run streetdeck with:

    "c:\Program Files\StreetDeck\StreetDeck" -NoNav

    The developers probably don't see this error as they are likely running 'full' versions.
    SLOJAM

    1972 'slightly enhanced' 240Z
    Epia M10000 Win XP
    Creative Soundblaster Audigy 2 ZS
    7" Touchscreen XMPCR GPS

  6. #6
    Variable Bitrate rcdash's Avatar
    Join Date
    Dec 2004
    Posts
    236
    Confirmed - no errors here (full version)

  7. #7
    Newbie
    Join Date
    May 2005
    Posts
    46
    This issue (the requirement to have -NoNav for trial runs) has gone away with 1.0.5.3, although not stated explicitly in the release notes.
    SLOJAM

    1972 'slightly enhanced' 240Z
    Epia M10000 Win XP
    Creative Soundblaster Audigy 2 ZS
    7" Touchscreen XMPCR GPS

Similar Threads

  1. SD crashes when pressing volume ctrl or play
    By ryguy in forum StreetDeck
    Replies: 14
    Last Post: 07-13-2006, 09:19 AM
  2. LOG: Software installation and setup
    By d_sellers1 in forum Software & Software Development
    Replies: 9
    Last Post: 06-08-2006, 09:11 PM
  3. phoco crashes my system when installed
    By mick0uziel in forum PhoneControl
    Replies: 0
    Last Post: 03-04-2005, 01:25 PM
  4. MediaEngine Crashes when trying to update DB
    By ppgt94 in forum Media Engine
    Replies: 5
    Last Post: 08-26-2004, 05:53 PM
  5. ME 2.0 Official Bug Reports
    By phat_bastard in forum ME Archive
    Replies: 67
    Last Post: 01-31-2004, 06:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •