Wiring that will be used for speakers and RCAs:
The Focal Be Tweeters are driven by the front two channels of the STEG 4|01 amplifier (75w/channel). Speaker wire length for these runs are around 15'. The crossover point for these are around 5,000 Hz.
40' of TEF 4/18 – stranded
The Focal 3w2 mid-range drivers are driven off of the rear channels of the STEG 4|01 amplifier (75w/channel). Speaker wire length for these runs are also around 15'. The crossover points for these speakers are around 4,000 Hz - 150Hz.
TPR 2/14 – 40'
The Focal 5" Be midranges are driven off of one STEG 2|02 amplifier (150w/channel). Speaker wire length of this bit is around 12'. The crossover point for these speakers are around 150 Hz to 50 Hz.
TPR 4/14 or Quartet 30'
The Focal 40KX 16" subwoofer is driven off of the other STEG 2|02 amplifier. The sub has dual 2 ohm coils, so we are running the amp bridged at around 1 ohm. This amp was modified by Duane at Orca to make it stable at a 1 ohm load. Speaker wire length is around 6'. The crossover point for this speaker is around 40 Hz and down. Sextet 8'
Encore II Interconnects.
