Quote: Originally Posted by
eugclark 
I have the same problem using a Hauppauge WinTV HVR1100 PCI card. There is no sound in the TV mode despite the fact there is sound when I use the WinTV2000 software supplied with the card. If I select in the TV settings an "audio device", which in my case is the "Intel Integrated audio" on a Dell GX240, the TV repeatedly bleeps, until I reselect none for "audio device".
Another problem is when I toggle between the TV, the composite video input and the S-video input (I have two cams going into the WinTV card), the signal on the S-video input disappears into a blue screen. The TV and the composite signal are unaffected.
Can anyone help?
you should be selecting the TV Audio source of your TV tuner, not your sound card... For example with my USB WinTV device I have a WinTV Audio Device that I select and the audio comes in...
the drivers didn't install the first go around, but they were on the disc, then I loaded WinTV2000 and made sure it was selected to send the audio through the USB, then selected WinTV USB Audio Device and the audio came through just fine...
never used the device you are talking about, but it should be similiar... if it's a PCI card it should have it's own Audio device, unless it outputs to Wave, then you would hear it anyway...
david