MP3Car.com - View Single Post - Laptop remote switch

frontliner · 02-14-2007, 05:58 PM

Quote: Originally Posted by quark

I have taken the measures on the solders (ohmmeter at 200 value) :

- on d and + on e : OFF gives 1 . and ON gives 00,8
- on a and + on b : OFF gives 1 . and ON gives 00,8 (same)

My meter is an electronic one (Elix LX-830B)...

Meter ON, not touching anything = 1 .
Touching probes together = 00,8

So, continuity mesures are corresponding with the one taken in my first post (see above)... There is continuity when button is ON (00,8)...

So, i guess i can wire d and e as i said previously...

And what about the volume potentiometer ?

Here's another pic (view under the PCB/other side where is the potentiometer). Notice that there is a chip --> could it be a numeric potentiometer ? :

02-14-2007, 05:58 PM	#8
frontliner Newbie Join Date: Dec 2004 Location: Belgium - south Vehicle: BMW E36 320i Posts: 14 My Photos: ()	Quote: Originally Posted by quark I have taken the measures on the solders (ohmmeter at 200 value) : - on d and + on e : OFF gives 1 . and ON gives 00,8 - on a and + on b : OFF gives 1 . and ON gives 00,8 (same) My meter is an electronic one (Elix LX-830B)... Meter ON, not touching anything = 1 . Touching probes together = 00,8 So, continuity mesures are corresponding with the one taken in my first post (see above)... There is continuity when button is ON (00,8)... So, i guess i can wire d and e as i said previously... And what about the volume potentiometer ? Here's another pic (view under the PCB/other side where is the potentiometer). Notice that there is a chip --> could it be a numeric potentiometer ? :