|
what I meant was the far outer edges of the screen bezel, especially at the top is not touching the vinyl its hovering in the air(it looks like it in the picture anyway). Looks damn good for a first time, I havent had to many times where the material wouldnt fit into the bezel, but have scene it happen, If you want that really clean look what you do is use ABS or MDF to fabricate a new bezel that will allow for the vinyl/leather gap, takes another 1/2 of work but looks alot better, I dont even offer surface mount screens at the shop anymore. you just lay the screen on the MDF and put dbl stick tape on it to account for the thickness of the vinyl, then trace and cut, ABS is trickier you have to get 1 long piece and bend it where you want then weld the 1 seam.
Just trying to help.
|