|
m2atx from cartft
I recived my voom with an m2 atx supply pre-built from cartft.
When i opened it up to check everything was correct,i noticed they had put the white on J1 and red on J3.
I presumed the red should be always live and white should be igniton on.
And the manual backsup my presumption.
So J1 should be red and J3 should be white.
I contacted cartft and they replied saying they have wired it correct and white is J1 and red is J3.
Should i just connect the white to the battery and red to ignition?
I would have just switched them on the board but they are really stiff and i cant be bothered.
|