MP3Car.com - View Single Post

tigergibb · 03-03-2007, 04:05 PM

The lilliput bezel was stuck to the dash peice with superglue and held for about 60 seconds. It was then clamped down. We then expoxied the bezel to the dash peice and left it for a few hours to cure.

It stuck in perfectly behind the dash peice... no sanding or anything was needed.

03-03-2007, 04:05 PM	#18
tigergibb Variable Bitrate tigergibb's CarPC Specs Join Date: Nov 2006 Location: Snellville, GA Vehicle: 2003 Nissan Xterra Posts: 267 My Photos: ()	The lilliput bezel was stuck to the dash peice with superglue and held for about 60 seconds. It was then clamped down. We then expoxied the bezel to the dash peice and left it for a few hours to cure. It stuck in perfectly behind the dash peice... no sanding or anything was needed. __________________ 2003 Nissan Xterra Worklog Total amount spent so far: $1196.64 You will probably spend AT LEAST 2x what you initially budget for your CarPC Project! 2003 Nissan Xterra - Modifications