MP3Car.com - View Single Post

kpjuk · 03-17-2007, 03:28 AM

This can be done, although it requires a lot of work. I developed a concept skin called Minimal that has a button to move a row of buttons from the top of the screen to the bottom, although the main objective was to see if I could develop a skin with transparency.

Minimal Skin

In effect it needs two skins to be developed which are swapped over by an auotit script, and the skin is then reloaded. It is a lot of work to maintain.

I have started to do a 1024 x 768 skin without the use of INC files, so that pRoFiT's editor will work with it, to make it easier to change by the community if wanted.

Don't underestimate the amount of effort needed to do something like this though.

cheers
KPJUK

03-17-2007, 03:28 AM	#8
kpjuk Maximum Bitrate Join Date: Dec 2003 Location: West Midlands Vehicle: Peugeot 807 - 2003 Posts: 451 My Photos: ()	This can be done, although it requires a lot of work. I developed a concept skin called Minimal that has a button to move a row of buttons from the top of the screen to the bottom, although the main objective was to see if I could develop a skin with transparency. Minimal Skin In effect it needs two skins to be developed which are swapped over by an auotit script, and the skin is then reloaded. It is a lot of work to maintain. I have started to do a 1024 x 768 skin without the use of INC files, so that pRoFiT's editor will work with it, to make it easier to change by the community if wanted. Don't underestimate the amount of effort needed to do something like this though. cheers KPJUK __________________ M1000, 512MB, 512MB CF, 6GB Disk (4200rpm), DVD/RW, Dynamix 8" screen, M2-ATX, Custom case,Too many hours building and rebuilding and rebuild.......