Quote: Originally Posted by
axaios 
Same problem with Cinergy 600. The device appears in the device manager. However it does not appear in Centrafuse under "audio device" in TV settings. The sound is sent through the mic input of my soundcard. The card works fine with it's own software but I had to change the setting from Greece to Germany(I live in Greece). Otherwise I got crappy sound. The same thing happens with Centrafuse! Is there any way to fix it?
So you get video but no audio?
Did you try to select MIC as the audio device? If not try that...
I believe there might be an issue with the TV and using sound card inputs, but that should not be hard to fix...
Let me know...
If you load TV and hear no sound, load the windows mixer while Centrafuse is running and go to the recording section of the mixer... Then make sure to select the input you are using, you said MIC I believe...
Then go to the playback section and make your input, MIC, is unmuted...
Then you should hear audio...
After this test I will know the issue and can fix it...
Also before you do this testing, make sure Centrafuse is closed, delete any error.log file in the root install folder, then do the testing above...
Then if a new error.log is created it will be only relevant information and post that here with your results...
I did not do much testing with the sound card inputs and TV, I used all USB devices for testing and they send the audio through a seperate audio device... Mainly because I develop mostly on a laptop, lots of travel...
I think I have a USB WinTV though that I can switch to use audio output jacks instead of USB and test this... I will look into it as well...
video, channel changing, source input changing all works fine, just audio right?
david
Quote: Originally Posted by
Alfredbra Hi,
The tv tuner does appear in device manager but there is no sperate device for the audio. like i said the tuner works fine it its dedicated software. I took another video card to test out from work today also, its a avermedia a16d hybrid card with FM. This card uses BDA drivers and i cannot get it to work either with cf. Basicly i get no picture at all on any of the channels i try. All is displayed is a noisey grainey grey screen. again the tuner works fine in its dedicated software.
if you get snow then the device is getting init then... With Centrafuse loaded does the software it came with give an error? If so then that should mean Centrafuse did init the device and is talking with it and has it locked...
First are there any updated or possibly older more stable drivers you can try? Just anything different to rule out drivers?
Did you set PAL/NTSC setting?
I assume you are having an audio issue as well... Check my post above and run the same test and let me know the results...
david