|
help please!!! swapping cd-unit from stock HU
hi guys, need help with this:
i have just purchased a new car (opel corsa- european - GM make)
unfortunately the stock HU features cd player with no mp3 capability
and that is very very bad. I like to listen a lot of music, and it's not nice to
cary and keep swapping a pile of cd's ....
the stock HU is a Delphi-Grundig unit named CD30
I have dismantled it wanting to find some connectors for aux in but with no luck
I doesn't have Aux-in
So ---- my plan is:
I want to swap the cd-unit with another one- mp3 capable this time
from the Unit's amp and controller bord comes out a 14 pin connector&cable to the cd reader unit placed below the amp board....
I purchased an aftermarket Delphi Grundig cd-player with mp3 with the hope that it has the same 14 pin conector and just swap the cd drive.
But the new drive connects to it's amp board with a 16 pin connector adn cable.
The new unit I bought has the pins described and noted on the amp board so it great that at least I know the pins on the new drive. Out of the 16 pins 3 are ground and one is no connect so there are basically 13 pins active.
So How do I figure out and connect the new cd drive in the old and stock HU
The pins on the stock HU are not noted so how do I find out which is which?
the original HU's cd drive is a Philips CDM-M6 4.8/31 so I guess that it's Mbus compatible cause of the "M" in the CDM M6.....
So anyone?! Help!!! I want to keep the new HU because of it's integrated faceplate in the dash....
Please help
the pins....
|