Well i just realized that after having my system done for over a year and a half i have yet to post the photos here.
My goal here was to make no mods to the car interior, so i have made the screen just snap in, the computer brackets just bolt to the factory holes, and all wiring was run in a single harness.
Power was taken from the fuse box using a fuse tap.
PC Specs
Screen: Lilliput 619
Motherboard: Jetway J7F3E
Processor: 1.4GHz AMD Geode
Memory: 512MB
Hard Drive: 40GB Seagate
Front End: StreetDeck
GPS: BU-353
PSU: M2-ATX
Radio: XM Direct
sound card: Creative PCMCIA Audigy Zs
The Factory monsoon amp is used with the Custom Amp turn on circuit that is powered by the M2-ATX Amp Pins.
The Screen is mounted in my VW Bezel that i have designed and have started to get produced. Will be available soon on the MP3CAR shop.
I mounted the PC on L brackets that i re-drilled the holes to match the holes from the factory cd changer bracket.
You can see a article i wrote about it last year here:
http://www.geardigest.com/2006/06/22...ur_own_car_pc/
The Car
APR Stage 2 - Magnaflow exhaust - Renner Motorsports 3" custom DP - H&R Sport springs & Bilstien shocks/struts - Neuspeed 32mm rear sway bar.
The Dash
The Car PC
Power
Power
Amp Turn on
