Quote: Originally Posted by
mdlesk 
I am only getting audio out of the right channel and not the left channel. I have the shunt jumper the middle pins. Is there supposed to be another shunt on there somewhere. The manual says that there are 2, while I only have one. Also when I connected my sub amp to the mic jack after configuring everything it is still putting music out of my 10" sub, when I just bass only. Any ideas?
Which jumpers are you talking about? I didn't change any of the jumper settings, it should work out of the box with the instructions I provided.
You may have the center channel feeding into the amp for the subwoofer which would provide sound from your sub, but most likely that's not your problem. I also got sound from my sub but I went into the software and disabled the center channel which helped a little and then I turned a few settings on the amp to change the cutoff for the sound going to it. Now it's about 98% bass.