|
The HQCT's are supported by CF, but using a DAC can make things a bit more difficult.
I assume you use a DAC for sound quality reasons, so putting the radio in between the DAC and the amp(s) is probably not an option. Volume control would be problematic and time shifting impossible in that config too.
If you have onboard sound available, you could set that as you default recording device in windows, and the DAC as default playback device. That should work, but I haven't tested it (I will today I guess, as I'm rebuilding an XTroniC FX1 prototype that works the same way - using CF 1.12)...
Hope this helps a bit,
Good luck!
Joachim
|