MP3Car.com - View Single Post - Carnetix P2140, No solder Power button, Wake on Link?

spaceskater · 06-08-2007, 12:53 AM

I believe that the 2140 already has a built in relay for the ACPI signal that is used for the Xenarc systems, it is activated by changing a jumper on the pcb.

I an not 100 percent sure but I thing it connects to ground momentarilly. This should work perfectly for your case. You can find out exactly what it does ether by using a multimeter or if you are not very hands on just ask around in the carnetix site and forum. The guys there are very helpful.

I hope that helps! You are lucky that your laptop does wake-up using this trick. many systems don't have that function.

06-08-2007, 12:53 AM	#3
spaceskater Constant Bitrate Join Date: Feb 2005 Location: Boston,MA Posts: 204	I believe that the 2140 already has a built in relay for the ACPI signal that is used for the Xenarc systems, it is activated by changing a jumper on the pcb. I an not 100 percent sure but I thing it connects to ground momentarilly. This should work perfectly for your case. You can find out exactly what it does ether by using a multimeter or if you are not very hands on just ask around in the carnetix site and forum. The guys there are very helpful. I hope that helps! You are lucky that your laptop does wake-up using this trick. many systems don't have that function. __________________ Will never be DONE! There is always something to add VIA EPIA SP13000,1GB DDR,80Gb 2.5” SATA HDD,8" Xenarc LCD with t/s,Linksys Bluetooth,Logitech wireless trackball,OBDII,RearView wide angle cam,XM radio,2 Wifi external antennas, Frodo,Navivoice