|
what a bad *** amp!
so yeah you'd go:
car pc-> dac -> amp
you may need a splitter if the amp doesn't have a switch to send the signal to all chans from a stereo pair... not a big deal
then you just wire it like normal. just make sure that the x-over settings on the amps will work with your set up. if it doesnt you may need an active x-over after the dac...but i'd assume that that amp has a pretty good x-over
__________________
New System in progress:
M10k
Phaze TD1500 ~> Dynaudio MD130
Phaze TD1500 ~> Seas g18rnx/p
Zapco Ref 500.1 ~ 12" tc-9
Behringer DCX2496 ~ Envision Electronics psu
Transflective Xenarc
My Car Pc Install
|