|
Newbie Carnetix p2140 - SX260 Question
Sorry for the longish newbie post.
But after reading the threads on here I decided to go with a Dell SX260 and the Carnetix p2140 setup instead of the Laptop that I had handy.
I've read all the threads on this but cannot get the following setup to work:
p2140 Input
2x Red - Positive Live via a fuse
2x Black - Ground
Yellow - Ignition
p2140 Output
Pri Red - Red & Brown cables on SX260 lead (12v)
Pri Black - Black & White cables on SX260 lead (Ground)
Sec Red - Red on Touchscreen (12v)
Sec Black - Black on Touchscreen (Ground )
Now when I connect the input and output connectors to the p2140, I dont get any led display. So I have checked the connections with a Voltage Test Light and found that the two input reds were fine, the connection between the p2140 and SX260 lead had no power. However when I tested that connection it seemed to make a circuit and the led display flashed.
Anyone have any ideas what is wrong.
Cheers
DAn
|