Of course there are VGA-to-LVDS controllers!
They are used in all displays! Lack of sleep is taking its toll…
Turbocad6, I’m glad you’re here to guide noobs, such as myself, through this complex transflective web. Bad decisions from too little information can be dangerous indeed.
It appears that the EPIA EN15000G only needs the transmitter card to connect to the panel:
VIA LVDS-07G 24-Bit
http://www.mini-box.com/VIA-LVDS-07G...=8&category=20
VIA LVDS-07G 24-Bit User’s Manual
http://resources.mini-box.com/online...-24-manual.pdf
Via VT1631L LVDS Transmitter Chip
http://www.via.com.tw/en/products/vi...y/lvds/vt1631/
It appears the VIA LVDS-07G card
ALSO routes panel controller voltage (3V) and inverter voltage (5V) but I need to check the specs on the EPIA EN15000G. I don’t know if it can supply enough current. Hopefully the NEC panel spec can answer these questions. I will still need the inverter to drive the CCFL.