right now it's mounted but not molded, I have to decide what I'm doing up there, may eliminate the rear view mirror all togeather & have another rear camera for driving, the factory rear camera now points down & it's a fisheye lens, really wide but no distance abilties really, good for parking but not as primary rear view. if I eliminate the mirror then I have no need for a rear wiper, so the second camera would go thru the wiper hole & the wiper eliminated, then I gotta see if I'm going to mount the display of the driverack up there too... that console may take a little while to finalize really.
tonight I was able to mount the radio & align it with a slot that I made above the clock in the console., I was able to fit it all in there, clock & ashtray even intact... the cd's load & eject nicely, & are guided in by the bottom edge of the upper dash, works pefectly with no jambs or missalignments, smooth
you don't even see this slot unless you bend down to look for it, I still need to put a flap inside so it looks finished 100%, but it looks pretty good really, not ugly at all & not even seen mostly.
I still need to relocate the *slot occupied* sensing switch from the upper orig slot down to the lower, this tells the radio theres a disc waiting to be loaded, but that shouldn't be a problem really, I'll do that when I put the pc slot load drive in the upper opening, so this part is pretty much done too, it's getting there, plates on this thing any day now
