MP3Car.com - View Single Post - How do I ground my M2-ATX?

muldrick · 10-19-2007, 06:50 PM

Check the manual.
3 wires, positive, negative, and remote on.

1 Positive = battery power
2 Negative = negative battery
3 Remote-on = Ignition switch.

I think running the wires correctly instead of rigging it will take just as long.
I don't recommend rushing it. I'd do it after the camping trip, and take your time. (lest you fry something)

IE: Do not run a negative wire from the negative to the chassis on the M2-ATX.

Good luck.

10-19-2007, 06:50 PM	#2
muldrick FLAC Join Date: Jun 2004 Location: South-Central PA Posts: 1,230	Check the manual. 3 wires, positive, negative, and remote on. 1 Positive = battery power 2 Negative = negative battery 3 Remote-on = Ignition switch. I think running the wires correctly instead of rigging it will take just as long. I don't recommend rushing it. I'd do it after the camping trip, and take your time. (lest you fry something) IE: Do not run a negative wire from the negative to the chassis on the M2-ATX. Good luck. __________________ Now faith is being sure of what we hope for and certain of what we do not see.