|
I ordered a few more parts from Chris at Mo-Co-So.com and also ordered the endplate and wiring for the new 3rd gen case. If you have the old Case call and him and ask about the newer end plate. It's worth it.
Some features of the new endplate design include a 6 pin Molex connector. I can only see myself using 4 of the 6. Power, Ground, Ignition, and amp turn on. The 5&6th wires are Probably for 12v and 5v out. Which is a good idea, but the most common thing that is powered from 12v is the monitor so Chris also included a 12V power/ground cable that mounts with a coaxial plug on the case. This plugs into the included 13' power cable to plug directly into the monitor.
So with these changes to the endplate and the bigger cooling vents, and larger 50MM fan in the new case design, This case now is even better and worth a look.
Dingo
__________________
Progress: 3.6% Finished (still learning the basics) total parts.... 3. Total invested so far.... $145
91 Jeep cherokee 8" custom lift, 3/4 ton running gear 36" swampers, GPS, Onboard air, Onboard Shower
|