MP3Car.com - View Single Post

NiSlo · 12-06-2007, 11:47 PM

@Lukeyson
I've tried every baud rate available to me in hyperterminal and still no luck. I have triple checked the connection settings and they are as you and michbound have suggested.

@michbound
I was thinking the same thing. It was a few days ago that I did it so my memory is a little hazy, but I have obviously been able to connect at 115200 to issue the ATWCS after having sent the ATSCS5 command as you mentioned, but for whatever reason I cannot now. As I also said in my earlier post, when hyperterminal is 'connected' at 115200, the pc is sending each charachter as I press it (the pc side rx led lights up on the module whenever I type a letter) rather than it sending the full sentance when I press enter. Is this normal as I don't remember it doing this before I played with the baud?

12-06-2007, 11:47 PM	#9
NiSlo Variable Bitrate NiSlo's CarPC Specs Join Date: Nov 2006 Location: Gold Coast, Australia Vehicle: 06 Impreza Hatch Posts: 426 My Photos: ()	@Lukeyson I've tried every baud rate available to me in hyperterminal and still no luck. I have triple checked the connection settings and they are as you and michbound have suggested. @michbound I was thinking the same thing. It was a few days ago that I did it so my memory is a little hazy, but I have obviously been able to connect at 115200 to issue the ATWCS after having sent the ATSCS5 command as you mentioned, but for whatever reason I cannot now. As I also said in my earlier post, when hyperterminal is 'connected' at 115200, the pc is sending each charachter as I press it (the pc side rx led lights up on the module whenever I type a letter) rather than it sending the full sentance when I press enter. Is this normal as I don't remember it doing this before I played with the baud? __________________ I installed my carpc into my pet Kangaroo, mate.