|
Hey Dave
I don’t know if you have tried the Infill G4 Radio.
But my description was a little misleading
This is how the Infill G4 radio works.
If you push scan. The radio scans to a station with good reception – stops for 5 seconds and store it from 1 to 10. When finish scanning it goes to stored station 1 for 5 seconds. If you push scan one more time you will stay there, if not it goes to stored station 2 and so on
If you push tune up/down the radio tunes to the next station, and stay there.
I like the working principal for the Infill G4 radio much, and hope the radio plugin for CF will work the same way.
But one of the most confusing issues whit the CFinfill/CF1.46 version for the Infill G4 radio, is that if you push SCAN ore tune the bottom stays highlighted until you push again?? And the response time from when you push a bottom and something happens together what you can hear of sound is almost three different thing.
But if you know which radio frequency you want to hear, just push in the number of the frequency and it work like a charm. Just don’t drive to far so you have to use scan
|