MP3Car.com - View Single Post

bes51659 · 02-16-2008, 04:56 AM

I've started on the pcb design. I've made my first library symbol in Eagle CAD

I am sure its got lots of errors...

The GPS receiver itself is due 21 march...

There is some confusion about how an active antenna is powered. (According to spec his lassen receiver require an active antenna and has powersupply for it??!?) Is it thru the standard SMB connector? If you've got some info, please step forward.

Me and street97 is also trying to get hold of higher quality schematics on how to interface the receiver than the one at the end of the dev kit manual. Q lies with Trimble right now (Thanks Richard of Diamond Point)

Again, help is apreciated.

02-16-2008, 04:56 AM	#36
bes51659 Variable Bitrate bes51659's CarPC Specs Join Date: Sep 2005 Location: Stockholm, Sweden Vehicle: 01/BMW/325ti Posts: 410 My Photos: ()	Small update I've started on the pcb design. I've made my first library symbol in Eagle CAD I am sure its got lots of errors... The GPS receiver itself is due 21 march... There is some confusion about how an active antenna is powered. (According to spec his lassen receiver require an active antenna and has powersupply for it??!?) Is it thru the standard SMB connector? If you've got some info, please step forward. Me and street97 is also trying to get hold of higher quality schematics on how to interface the receiver than the one at the end of the dev kit manual. Q lies with Trimble right now (Thanks Richard of Diamond Point) Again, help is apreciated. Last edited by bes51659 : 05-15-2008 at 03:59 PM.