MP3Car.com - View Single Post

aperali · 02-28-2008, 07:40 AM

hi people,

i'm thinking to get audio direct from the mobo (F_AUDIO PANEL) instead of using rear i/o connectors.
my mobo has 9 pins which are:
1= MIC
2= GND
3= MIC_BIAS
4= POWER
5= AUDIO FRONT (R)
6= AUDIO REAR (R) / RETURN (R)
7= NC
8= NO PIN
9= AUDIO FRONT (L)
10= AUDIO REAR (L) / RETURN (L)

the problem is i dont know where to connect the 4ch amplifier cables cause each channel has 2 wires.
does anybody knows how to do it?

im thinking to connect the positive wire from each channel input on 5, 6, 9 & 10 pins and the negative one on the pin 2, but im not sure about it. could you help me, please?

02-28-2008, 07:40 AM	#9
aperali Low Bitrate aperali's CarPC Specs Join Date: Aug 2007 Location: Rio de Janeiro, Brazil Vehicle: 2007/Kia/Sorento EX CRDi Posts: 107 My Photos: ()	using mobo header to get sound hi people, i'm thinking to get audio direct from the mobo (F_AUDIO PANEL) instead of using rear i/o connectors. my mobo has 9 pins which are: 1= MIC 2= GND 3= MIC_BIAS 4= POWER 5= AUDIO FRONT (R) 6= AUDIO REAR (R) / RETURN (R) 7= NC 8= NO PIN 9= AUDIO FRONT (L) 10= AUDIO REAR (L) / RETURN (L) the problem is i dont know where to connect the 4ch amplifier cables cause each channel has 2 wires. does anybody knows how to do it? im thinking to connect the positive wire from each channel input on 5, 6, 9 & 10 pins and the negative one on the pin 2, but im not sure about it. could you help me, please?