View Single Post
Old 03-08-2008, 09:39 AM   #18
ptk
Variable Bitrate
ptk's CarPC Specs
 
Join Date: Apr 2004
Location: Singapore
Vehicle: 2006/VW/GTi
Posts: 294
My Photos: ()
nsgrossman:
there are 3 coaxial cables. not 1.

what kind of stats are u looking for? as in the dB? 0dB
it also depends on your WLAN card's output and if it supplies the bias voltage.

kao
Code:
Mechanical construction details: Dimensions (W x H x D) 81 x 45 x 42 mm (without rod) Weight 255 g Housing material PA6 Rod section 1 Rod length 50 mm Rod inclination 74° Installation Environmental conditions Temperature range -40° - +80° C Protection class IP66 (acc. IEC 60529) GPS Frequency range 1.57542 GHz +-1.023 MHz, (L1-band) Return loss > 12 dB Impendance 50 Ohm Current consumption max. 30 mA Gain typ. 2 dBic Amplification 24 dB +-4 dB Noise figure < 2.5 dB Voltage supply 3 - 5 VDC (remote fed) Cable type RG 174 Cable length 3000 mm Connector FME female CELLULAR Frequency range AMPS: 824 - 894 MHz GSM 900: 880 - 960 MHz GSM 1800: 1710 - 1880 MHz GSM 1900: 1850 - 1990 MHz UMTS: 1900- 2170 MHz Impedance 50 Ohm Load capacity max. 8 W pulsed acc. GSM standard Return loss > 12 dB Decoupling > 40 dB Rod wave 1/4 Rod gain 0 dB Cable type RG 174 Cable length 3000 mm Connector FME female WLAN Frequency range Bluetooth: 2400 - 2484 MHz IEEE Std. 802.11b: 2412 - 2484 MHz Impedance 50 Ohm Load capacity max. 1 W (acc. IEEE 802.11b) Return loss > 12 dB Gain 0 dB Cable type RG 174 Cable length 3000 mm Connector FME female

__________________
***
CarPC Ver 3 near completion.
ptk is offline   Reply With Quote