MP3Car.com - View Single Post - M2-ATX wont power Amp on

seninha · 03-13-2008, 10:04 AM

Quote: Originally Posted by stangg172006

sorry dont mean to hijack but what are you using to connect the two pins on the m2-atx to your amp? did it come with the psu or did you have to buy/fab your own?

What I use is the same cable that I did when my M1-ATX was installed.

This cable is attached to the right pin, as its mentioned on the manual.
Amp only powers up when engine is running,that means that the 12v that are needed is supllied by the PSU at that moment

03-13-2008, 10:04 AM	#9
seninha Variable Bitrate Join Date: Dec 2005 Location: Holland Vehicle: Mercedes ML 320 , 1999 Posts: 266 My Photos: ()	Quote: Originally Posted by stangg172006 sorry dont mean to hijack but what are you using to connect the two pins on the m2-atx to your amp? did it come with the psu or did you have to buy/fab your own? What I use is the same cable that I did when my M1-ATX was installed. This cable is attached to the right pin, as its mentioned on the manual. Amp only powers up when engine is running,that means that the 12v that are needed is supllied by the PSU at that moment __________________ Gods right foot!! Mercedes ML320. Intel D201GLY2,1024mb DDRII,120Gb S-ATA HD,HDradio,7"Touchscreen,2x 7"build in headrest screens,OBDII reader,Centrafuse.