danielkh

You are going with integrated wireless too, right? One other thing I found when I started integrating the system......not enough USB ports, even though this board has more than the usual.

On the board, it can handle another riser (another 2 ports). See if Chris has an extra riser laying around he can throw in the box. Right now, I use the 2 main usb ports, bluetooth/wireless on 2 internal ports, 4 ports coming out as 2 risers, and another 4 ports using PCMCIA card (don't think that is list in my specs as it is kinda new) for a total of 12 ports.

To give you an idea of USB ports needed. This is my system, but will give you an idea....

1) DVD drive
2) Satellite radio
3) GPS receiver
4) Hub for external jumpdrives, phone charger, etc.
5) EVDO Network device
6) IPOD
7a) Griffin Powermate
7b) Imon Ultrabay (I finally broke down and bought one. Haven't figured out how to mount it yet). This will replace the Griffin once mounted.
8) OBDII device
9) Andrea USB Microphone
10) Soundblaster Live 24 bit External
11) Touchscreen
12) Bluetooth (internal, but still using a port)
13) Wireless (same as above)

and if you are going to add it....

14) Radio hardware
15) Bluetooth phone

__________________
.
"Do not walk behind me, for I may not lead.
Do not walk ahead of me, for I may not follow.
Do not walk beside me either.
Just pretty much leave me the hell alone."
--unknown--