Quote: Originally Posted by
Shad0wca7 
Ok, how does this look:
Looks good.
Quote: Originally Posted by
Shad0wca7 I'm not sure how to go about removing the power switch relay alltogether and replacing it with a transistor to short the contact... do you mind giving me a few pointers with that?
Most power switches are between a signal line and ground. You can replace them with an open collector NPN transistor just like the ones you are using to switch the relays.
The relay is more portable in that it will work when the power switch is not configured in this way - might be best to stick with the relay.
__________________
6yr old first install died 20/8/2005 as result of bad bios flash.
New system : 6x5x2" contains 1GHz C3 PCM9373, ISR based PSU, 512Mb flash DOM, 8Gb CF HDD, 98Lite, DirectShow based frontend.
GPS : Rikaline 6010.
Display : LTM08C351 + LVDS receiver.