Quote: Originally Posted by
bpwned 
My P2140 has firmware version 1.83 and everything set to standard, except for shutdown lockout. I reduced that to 15secs. That's enough for the Mini to write all the data to the disk.
How do you power the LCD screen? From the secondary output of the P2140?
Because I'm using an Indash-LCD, I set the Shutdown-Delay to 15 sec and set the secondary power to follow the shutdown-delay for powering off. This gives the LCD enough time to close and disconnect (USB) before the mini is going to sleep/hibernate. Else the mini would wake up again, if the LCD is disconnect (itself) from USB.
Today again all the settings were gone.
ByE...