|
ok so it turns out that i have the right equipment with the right BIOS settings except that i needed the change the startup voltage jumper from 12.5 to 11V (from pin 5 to 4) since am testing with the ATX PSU rather than using the car battery.
now working like a charm
__________________
>> > Design & Planning . . . . . . . . . . . . . . . . . . . . 100%
> Software Installation . . . . . . . . . . . . . . . . . . . .98%
> Hardware Installation . . . . . . . . . . . 55%
>>> Overall Progress . . . . . . . . . . . . . . . . .85%
|