MP3Car.com - View Single Post - OPUS 320 and KINO-690S1

HiJackZX1 · 04-26-2008, 09:18 PM

Quote: Originally Posted by The1Architect

ok so it turns out that i have the right equipment with the right BIOS settings except that i needed the change the startup voltage jumper from 12.5 to 11V (from pin 5 to 4) since am testing with the ATX PSU rather than using the car battery.
now working like a charm

Turns out I did too. I changed to PIN 4 also and it worked perfectly. So once we put it back in the car, we switch it to PIN 5?

Only issue I have now is that I have a shut down delay, but the lowest is 10 seconds.

04-26-2008, 09:18 PM	#9
HiJackZX1 FLAC HiJackZX1's CarPC Specs Join Date: Jul 2007 Location: Miami Vehicle: 03 Dodge Durango SLT Posts: 1,472 My Photos: ()	Quote: Originally Posted by The1Architect ok so it turns out that i have the right equipment with the right BIOS settings except that i needed the change the startup voltage jumper from 12.5 to 11V (from pin 5 to 4) since am testing with the ATX PSU rather than using the car battery. now working like a charm Turns out I did too. I changed to PIN 4 also and it worked perfectly. So once we put it back in the car, we switch it to PIN 5? Only issue I have now is that I have a shut down delay, but the lowest is 10 seconds. __________________ PLANNING [50%] CAR PC ITEMS [75%] INSTALL OF PC [80%] INTERIOR MODS [35%] BUDGET [380%] HiJackZX1 Work Log Last edited by HiJackZX1 : 04-26-2008 at 09:21 PM.