|
you should connect the left positve to the gray/lt blue
left negative to tan/yellow
right positive to orange/red
right neg to brown/pink
being as that radio doesn't have a amp turn on you could get a lvt3 (low voltage trigger) what it does is reads the voltage coming down the spker lines and converts it to a remote output.
Or you can connect the remote to the yellow/black wire in the harness. Problem is if you do that and turn off the radio you run into the probablility that the amp will hunt for a signal and start to audibly hum, loudly..
By the way just splice into the wire no need to cut them. You can use a scotch lok or t-tap to make it easier. Hope this helps.
|