|
Prise off plastic front panel and then remove perimeter screws holding metal front plate with case fans mounted to it. You don't have to remove 2 X screws in centre of panel which secures front panel to CD/HD base (my pic shows removed). Slide base of case (MB is screwed to it) carefully forward together with rear IO panel and together with sliding out CD / HD base out of its side slots at the top. Be carefull of things hanging up like power supply, fan connectors, etc particularly any connected to rear body (not rear IO) like power which will stop case base sliding forward.
Pictures here are not of mp3car computer but my own build.
|