|
Mastero, I have questions regarding to this SDC.
The +5V wire is connect to the mobo ATX switch. Is it the pin that show +5V when the mobo is on right .....YES
If the ACC line go off for a moment Does the SDC go to the shutdown sequence?
IF POWER IS REMOVED ON THE ACC LINE THEN THE SDC WILL WAIT 0~15 MIN BEFORE SENDING THE ATX PLUSE. AND IF WITHIN THAT 15 MIN IF THE ACC LINE IS HOT AGAIN THEN NOTHING HAPPENS
SO WHEN YOU CRANK THE ACC GOES COLD FOR A FEW SECONDS THE SDC WILL NOT SEND THE ATC PLUSE.
Hope you got that \... sorry for the caps
Mastero
|