|
ITPS and PW-70: What turns it on?
Okay, got the ITPS connected to a Battery with a switch on the Red Input line.... flip the switch, it waits 5 seconds and then outputs 12VDC....
Cool....
Now I have it connected to the PW-70 (the Black to Black and Red to White)... After 5 seconds the ITPS outputs 12VDC but nothing on the PW-70 ATX plug... except the 5VSB, which is 5.02 VDC.... but all other posts on the ATX plug are dead....
Is this because I don't have the switch wire from the ITPS (the small gage red and black) connected to an ATX switch? That is what I think and hope... but yet it also seems strange that the PW-70 is being controled by a contact (the switch wire on the ITPS) that has nothing to do with it....
What do you guys think?
If so, what is the best way to simulate the closing of a computer power switch? Just quickly short them then let go????
Thanks in advance for your help.
Oh and just to save you the time, I did search using the text "PW-70 and Output"....
|