|
OPUS 150 three flashes
I've just plugged my new OPUS 150 Watt PSU into my MII 10000 board, and connected the wires up correctly.
When I turn on the ignition the PSU kinda starts up then stops again, and gives me 3 flashes of the LED....
The manual tells me: 1. Power supply is over loaded or shorted
2. The Power supply is faulty.
I hope it's not no.2, and number 1 seems unlikely as the OPUS is supposed to power these types of board with no problems!
Any ideas would be greatfully received.
Cheers,
Adam.
|