|
Sorry to be asking so many questions and thanks for the great explanation above (i understand now). Im thinking since nissan and infiniti are the same company im assuming the way the remote works are the same. I removed my remote today and i noticed that two of the wires seem to be grounded but one of the grounded wires was also crimped to another wire that i think goes back to the head unit. The third wire was not grounded to anythingand looks to head back to the head unit.
I understand the reverse polarity of it all and i think that i would connect pin 1 of the joystick port to each of the grounded wires with the diode and the resistor inline and then each of the two wires goes to either pin 3 or 6. What im not sure is what i do with that third wire coming out of the remote that goes straight to the head unit and is not grounded at all.
When you pulled yours out was it similar to what im explaining? If not then ill just test it myself.
__________________
Hardware: M10000 / 2.5" 700meg Solid State Drive / 30 gig 7200 rpm HD / DigitalWW 7" LCD / USB Touscreen / X10 Lola Remote / Serial GPS
Current Project: Turning Nissan Steering Wheel Remote into Joystick to control Frodoplayer
|