MP3Car.com - View Single Post - Lilliput auto-power on bungle! pls help!

JayKaye · 10-22-2004, 01:25 AM

Quote: Originally Posted by choyak

These tiny resistors are very difficult to solder. 103 is 10Kohms. If you were extremely dextrous you could get a normal 1/8 watt resistor, bend little hooks onto the leads and solder it in.

Thanks choyak

I am planning on getting the normal sized resistor and soldering it onto the board using thin flexible wires, so I dont run the risk of breaking off anymore solder point on the board. Unfortunately im not half as dextrous enough to do what you mentioned :P

Thanks again.

10-22-2004, 01:25 AM	#3
JayKaye Constant Bitrate Join Date: Jan 2004 Location: Sydney, Australia Posts: 190	Quote: Originally Posted by choyak These tiny resistors are very difficult to solder. 103 is 10Kohms. If you were extremely dextrous you could get a normal 1/8 watt resistor, bend little hooks onto the leads and solder it in. Thanks choyak I am planning on getting the normal sized resistor and soldering it onto the board using thin flexible wires, so I dont run the risk of breaking off anymore solder point on the board. Unfortunately im not half as dextrous enough to do what you mentioned :P Thanks again. __________________ Car PC v1 - 1999 - 2000 DOS 6.22 - MPXF - 2x16 LCD - 6.4GB Car PC v2 - 2002 - 2006 XP - 7" wide/touch - GPS - Tank batt relay - 100GB Car PC v3 - 2008 XP - 7" wide/touch - GPS - 802.11g - FM/XM - OBDII - WWW [\|\|\|\|\|\|\|\|\|\|\|\|\|\|----] 80% complete