|
Building a motorised screen without motors???
Ok guys im building my own LCD holder but it will work like a motorised LCD but it wont have motors.
The basic idea is to make a LCD slide out and up then u must manually fold the LCD down and push it back in when done.
So what im doing is building a case for this to slide out and open up.
The theory behind this is SPRINGS yeah im not crazy :P
What happens is when the LCD is pushed inside the case the spring streches so when u push the button to open the LCD the spring contracts and slides the LCD out of the case.
Ok so the spind just slides the LCD out right?
Then we have another spring which pulls the top of the LCD backwards to the case ro open set the LCD in view.
There will be a small wheel with foam on it at the top of the case so the LCD slides out smoothly and then when the end finally gets out it will angle the LCD so u can view it.
I will start building this soon and yes it will work some basic testing has been done and i have thought bout it all like slowing the speed the LCD slides out etc.
So what do u guys think?
__________________
CarPC Status:
GPS: 99%
Hardware: 99%
Software: 92%
Case Install: 99.9%
Dash Install: 100%
Car Install: 72%
|