Usually its as easy as matching the two pins. I might be wrong, but the pinouts from that LCD make it look like a monochrome LCD because there is no RGB pins.. just DL and DU pins.
Most commonly pin-outs look like this (in some sort of order):
Pin # Symbol Function
1 R0 Red Data single (LSB)
2 GND Ground
3 R1 Red Data single
4 VSync Vertical Sync Signal
5 R2 Red Data single
6 HSync Horizontal Sync Signal
7 R3 Red Data single (MSB)
8 GND Ground
9 GND Ground
10 CK Clock Signal for sampling data
11 G0 Green Data Signal (LSB)
12 GND Ground
13 G1 Green Data Signal
14 TST Should be opened during use
15 GND Ground
16 TST Should be opened during use
17 G2 Green Data Signal
18 GND Ground
19 G3 Green Data Signal (MSB)
20 GND Ground
21 GND Ground
22 Vcc +5 Volt Power Supply
23 B0 Blue Data Signal (LSB)
24 Vcc +5 Volt Power Supply
25 B1 Blue Data Signal
26 TST Should be opened during use
27 GND Ground
28 ENAB Data Enable Signal
29 B2 Blue Data Signal
30 GND Ground
31 B3 Blue Data Signal (MSB)
__________________
95 Honda Civic DX Coupe - In Progress
mp3civic site
|