|
Bugbyte: you might be able to help me.....
I am have designed a motorized slide out mechanism for a linITX screen using 4 servos (2 to control slide out - one left one right so they can be used to control yaw and 2 for the tilt for uber tilt power!)
What i want to do is have a switch for auto so when the doors unlock the screen comes out and then when the doors lock the screen goes in (unless the ign is on) - i have no probs doing this but i do have issues with my control circuit design:
At the moment my design uses a few 555 circuits and microswitches to switch the postion potentiometers (which can be adjusted to change the tilt and yaw) however i would like to build a nice control circuit and wondered if the stamp you used can be programmed to activate servos in sequence eithe rby sensing when they are at the desired position or using microswitches to change to the next part of the sequence.
__________________
If you want more answers on anything I have posted you can find me at digital-car.co.uk
or skiing or diving or doing somthing else fun!
|